# Flash-CHIP
Ready to use Flash environment for the C.H.I.P Single Board Computer

Simplyfies the Flashing Process for the C.H.I.P and PocketC.H.I.P Computer. 

## Instructions
1. Remove the C.H.I.P from its case (in case you have a Pocket C.H.I.P).
2. Connect the FEL and a GROUND pin of the C.H.I.P (for example, with a paperclip).
3. Connect the C.H.I.P its micro USB port to a USB port of your Linux machine.
4. In the Linux machine:
    - run ` git clone https://github.com/Thore-Krug/Flash-CHIP.git` to clone this repository.
    - `cd` into the location where you stored this repository.
    - run `sudo chmod +x Flash.sh`
    - run `./Flash.sh`
    - Select the version you want to install.
    - Wait until the installation finishes.
    - Enjoy!