43 lines
1.7 KiB
Markdown
43 lines
1.7 KiB
Markdown
# Flash-CHIP
|
|
Ready to use Flash environment for the C.H.I.P Single Board Computer
|
|
|
|
Simplyfies the Flashing Process for the C.H.I.P and PocketC.H.I.P Computer.
|
|
|
|
## Instructions
|
|
1. Remove the C.H.I.P from its case (in case you have a Pocket C.H.I.P).
|
|
2. Connect the FEL and a GROUND pin of the C.H.I.P (for example, with a paperclip).
|
|
3. Connect the C.H.I.P its micro USB port to a USB port of your Linux machine.
|
|
4. In the Linux machine:
|
|
- run ` git clone https://github.com/thore-krug/Flash-CHIP.git` to clone this repository.
|
|
- `cd` into the location where you stored this repository.
|
|
- run `sudo chmod +x Flash.sh`
|
|
- run `./Flash.sh`
|
|
- Select the version you want to install.
|
|
- Wait until the installation finishes.
|
|
- Enjoy!
|
|
|
|
## Troubleshooting
|
|
### General Issues
|
|
1. Kill the Script with ctrl + C
|
|
2. Read the output if something is not installed or Permissions are missing
|
|
3. Just restart the Script (fixes most of the Problem with FEL and Fastboot )
|
|
4. If this does not help reboot, retry
|
|
5. Open an Issue on this Git Repo.
|
|
|
|
### The script times out waiting for fel
|
|
This error is related to an insufficient amount of power provided by your USB port to the C.H.I.P.
|
|
If you have an external `5V` power supply, you can connect it to the `CHG-IN` pin of your C.H.I.P. to provide sufficient power.
|
|
Alternatively try a different (shorter, or higher quality) USB cable and check if your host PC has USB power saving enabled.
|
|
|
|
If this dos not work Install sunxi-tool v1.4.1:
|
|
```bash
|
|
git clone --branch v1.4.1 https://github.com/linux-sunxi/sunxi-tools.git
|
|
cd sunxi-tool/
|
|
make install-all install-misc
|
|
cd ../
|
|
./Flash.sh
|
|
```
|
|
## Support my work by Donating
|
|
|
|
https://www.paypal.me/a13tech
|